How to Check Lubricant
To get an accurate reading, the vehicle should be on a level surface.
- For Two-Wheel-Drive vehicles, the proper level is from 15mm to 40mm (0.6 in to 1.6 in) below the bottom of the filler plug hole, located on the rear axle. Add only enough fluid to reach the proper level.
- For All-Wheel-Drive vehicles, the proper level is from 1.0mm to 19.0mm (0.04 in to 0.75 in) below the bottom of the filler plug hole, located on the rear axle. Add only enough fluid to reach the proper level.
See also:
Transmission Messages
SERVICE TRANSMISSION
This message displays if there is a problem with the transmission.
See your dealer.
SHIFT DENIED
This message displays when using the Driver Shift Control (DSC) and
a ...
Airbag System Check
The airbag system does not need
regularly scheduled maintenance
or replacement. Make sure the
airbag readiness light is working.
See Airbag Readiness Light.
Notice: If an airbag covering is
...
Tips and Troubleshooting
IR Sensor Inoperative: Check that the batteries are good in the remote control.
Check that the remote Control IR Sensor is not blocked. Aim the remote control toward
the IR Sensor being controlled ...