Steering, Suspension, and Chassis Components
Visually inspect front and rear suspension and steering system for damaged, loose, or missing parts or signs of wear. Inspect the power steering for proper hook-up, binding, leaks, cracks, chafing, etc. Visually check constant velocity joints, rubber boots, and axle seals for leaks.
See also:
EPB Apply
The EPB can be applied any time
the vehicle is stopped. The EPB is
applied by momentarily lifting up on
the EPB switch. Once fully applied,
the BRAKE light will be on, and the
DIC message PA ...
Fuels in Foreign Countries
Never use leaded gasoline or any other fuel not recommended in the previous
text on fuel. Costly repairs caused by use of improper fuel would not be
covered by the vehicle warranty.
To check the ...
Overheated Engine Protection Operating Mode
If an overheated engine condition exists and the ENGINE POWER IS REDUCED message
is displayed, an overheat protection mode which alternates firing groups of cylinders
helps prevent engine damage. ...