See also:

Setting the Power Liftgate 3/4 Mode
To change the liftgate stop position. 1. Turn the liftgate switch to either the MAX, or the 3/4 mode position and power open the liftgate. 2. Stop the liftgate movement at the desired height by p ...

Hitch Cover (with Dual Exhaust)
To remove the hitch cover: 1. Turn the fasteners on the lower tabs 90 degrees counterclockwise. 2. Pull the lower edge of the cover out slightly. 3. Lift the cover up off the upper bracket. To r ...

SIDE BLIND ZONE ALERT SYSTEM OFF
This message indicates that the driver has turned the system off. ...