OnStar Overview

If equipped, this vehicle has a

If equipped, this vehicle has a comprehensive, in-vehicle system that can connect to a live Advisor for Emergency, Security, Navigation, Connection, and Diagnostic Services.

The OnStar system status light is next to the OnStar buttons. If the status light is:

- Solid Green: System is ready.

- Flashing Green: On a call.

- Red: Indicates a problem.

Push (1–888–466–7827) to speak to an or call 1–888–4–ONSTAR (1–888–466–7827) to speak to an Advisor.

Push - Make a call, end a call, to:

- Make a call, end a call, or answer an incoming call.

- Give OnStar Hands-Free Calling voice commands.

- Give OnStar Turn-by-Turn Navigation voice commands.

Requires the available Directions and Connections service plan.

Push Advisor to: to connect to a live Advisor to:

- Verify account information or update contact information.

- Get driving directions. Requires the available Directions and Connections service plan.

- Receive On-Demand Diagnostics for a check on the vehicle’s key operating systems.

- Receive Roadside Assistance.

Push connection to get a priority connection to an Emergency Advisor available 24/7 to:

- Get help for an emergency.

- Be a Good Samaritan or respond to an AMBER Alert.

- Get crisis assistance and evacuation routes.

    See also:

    Dolly Towing (Rear-Wheel-Drive Vehicles)
    Use the following procedure to dolly tow a rear-wheel-drive vehicle from the rear: 1. Attach the dolly to the tow vehicle following the dolly manufacturer's instructions. 2. Put the rear w ...

    SBZA Detection Zones
    The SBZA sensor covers a zone of approximately one lane over from both sides of the vehicle, 3.5m (11 ft). This zone starts at each side mirror and goes back approximately 5.0m(16 ft). The heigh ...

    Radio
    Press CONFIG to enter the configure menu options, then press CONFIG again, repeatedly until Radio is selected or press the Radio screen button to make changes for radio information displayed, pres ...