Remote Vehicle Start
With this feature the engine can be started from outside of the vehicle.
Starting the Vehicle
1. Press and release on the RKE transmitter." width=15 height=20 id="_x0000_i1061"
src="images/books/1183/1/index.39.gif" border=0>on the RKE transmitter.
2. Within two seconds, press and hold until the turn signal lamps flash, or for" width=22 height=22 id="_x0000_i1062"
src="images/books/1183/1/index.40.gif" border=0>until the turn signal lamps flash, or for
at least two seconds if the vehicle is not in view.
When the vehicle starts, the parking lamps will turn on and remain on as long as the engine is running.
The doors will be locked and the climate control system may come on.
The engine will continue to run for 10 minutes. Repeat the steps for a 10-minute time extension. Remote start can be extended only once.
Canceling a Remote Start
To cancel a remote start, do any of the following:
- Press and hold until the parking lamps turn off." width=22 height=22 id="_x0000_i1063"
src="images/books/1183/1/index.40.gif" border=0>until the parking lamps turn off.
- Turn on the hazard warning flashers.
- Turn the vehicle on and then off.
See also:
Passenger Sensing System
The vehicle has a passenger
sensing system for the front
outboard passenger position.
The passenger airbag status
indicator will be visible on the
instrument panel when the vehicle
is start ...
Cleaning the RSE Overhead Console
When cleaning the RSE overhead console surface, use only a clean cloth dampened
with clean water. Infotainment System 7-41 Cleaning the Video Screen When cleaning
the video screen, use only a clea ...
Voice Pass-Thru
Voice Pass-Thru allows access to
the voice recognition commands on
the cell phone. See the cell phone
manufacturer's user guide to see if
the cell phone supports this feature.
This feature ca ...