Starting the Engine Using Remote Start
1. Press and release on the RKE transmitter." width=15 height=20 id="_x0000_i1156"
src="images/books/1183/1/index.39.gif" border=0>on the RKE transmitter.
2. Within two seconds, press and hold until the turn signal lamps flash. This" width=22 height=22 id="_x0000_i1157"
src="images/books/1183/1/index.102.gif" border=0>until the turn signal lamps flash. This
confirms the request to remote start the vehicle has been received. If the
vehicle' s lamps are not visible, press and hold for at least two" width=22 height=22
id="_x0000_i1158" src="images/books/1183/1/index.102.gif" border=0>for at least two
seconds.
During the remote start the doors will be locked and the parking lamps will remain on as long as the engine is running.
The engine will shut off after 10 minutes unless a time extension is done or the ignition is put in ON/RUN/START.
3. Press the brake pedal and select the ON/RUN/START ignition mode to drive the vehicle.
See also:
Driving in Water
WARNING
Driving through rushing water can be dangerous. Deep water can sweep your vehicle
downstream and you and your passengers could drown. If it is only shallow water,
it can still wash a ...
Pulling a Trailer
Here are some important points:
- There are many laws, including
speed limit restrictions that apply
to trailering. Check for legal
requirements with state or
provincial police.
- Do not tow ...
Online Owner Center
Manage your vehicle (U.S.) at cadillac.com. Click on “Owners,” then
“Manage my Cadillac/Owners Login.”
Information and services customized for your specific vehicle — all in one
convenient place. ...