Shutting the Engine Off After a Remote Start
To cancel a remote start, do any of the following:
- Press until the parking lamps turn off." width=22 height=22 id="_x0000_i1159"
src="images/books/1183/1/index.102.gif" border=0>until the parking lamps turn off.
- Turn on the hazard warning flashers.
- Turn the vehicle on and then back off.
See also:
PARKING ASSIST BLOCKED
SEE OWNER'S MANUAL
If the vehicle has the Ultrasonic
Rear Park Assist (URPA) system,
this message displays if there is
something interfering with the park
assist system. See Ultrasonic
Parking Assist for
mor ...
StabiliTrak® System
StabiliTrak assists with directional
control of the vehicle in difficult
driving conditions. The system turns
on automatically every time the
vehicle is started.
- To turn off both traction
...
Starting the Vehicle
1. Aim the RKE transmitter at the vehicle.
2. Press and release .
3. Immediately after completing Step 2, press and hold
until the turn signal lamps flash.
When the vehicle starts, the parking la ...






