Manual Operation of Power Liftgate
To change the liftgate to manual operation, turn the mode switch to the OFF position.
With the power liftgate disabled and all of the doors unlocked, the liftgate can be manually opened and closed. The effort required to operate a power liftgate is greater than the effort required to operate a non-power liftgate.
To open the liftgate, press the touch pad on the handle on the outside of the liftgate, and lift the gate open.
To close the liftgate, use the pull cup to lower the liftgate and close.
With the power liftgate disabled, the liftgate electric latch will still power latch once contact is made with the striker. Always close the liftgate before driving.
If the RKE button is pressed while power operation is disabled, the turn signals flash and the liftgate will not move.
The liftgate has an electric latch.
If the battery is disconnected or has low voltage, the liftgate will not open. The liftgate will resume operation when the battery is reconnected and charged.
See also:
Exterior Lighting
The exterior lamps control is located on the instrument panel to the left of
the steering column.
The exterior lamps control has four positions:
: Briefly turn to this position to turn the ...
Trunk (Sedan, Coupe)
WARNING!
Exhaust gases can enter the
vehicle if it is driven with the
liftgate or trunk/hatch open,
or with any objects that pass
through the seal between the
body and the trunk/hatch or
...
Magnetic Ride Control
The XLR also is one of the world's first vehicles to be equipped with
Magnetic Ride Control - electronically controlled, magnetic-fluid based
real-time damping. The system uses four wheel-to-body ...