See also:

EPB Release
To release the EPB, turn the ignition switch to the ON/RUN position, apply and hold the brake pedal, and push down momentarily on the EPB switch. If you attempt to release the EPB without th ...

When the System Does Not Seem to Work Properly
The rear vision camera system might not work properly or display a clear image if the following occurs: - It is dark. - The sun or the beam of headlamps is shining directly into the camera l ...

Leaving After Parking on a Hill
1. Apply and hold the brake pedal while you: - Start the engine. - Shift into a gear. - Release the parking brake. 2. Let up on the brake pedal. 3. Drive slowly until the trailer is clear of ...