Front Seats
The vehicle's front seats have adjustable head restraints in the outboard seating positions.

The height of the head restraint can be adjusted. To raise or lower the head restraint, press the button located on the side of the head restraint, and pull up or push the head restraint down, and release the button.
Pull and push on the head restraint after the button is released to make sure that it is locked in place.
The front seat outboard head restraints are not designed to be removed.
See also:
Compass Calibration Procedure
1. Before calibrating the compass,
check that the compass is set
to the correct variance zone.
See “Compass Variance (Zone)
Procedure” earlier in this
section.
Do not operate any switches
...
Entering the Feature Settings Menu
1. Turn the ignition on.
To avoid excessive drain on the
battery, it is recommended that
the headlamps are turned off.
2. Press the customization
button to enter the feature
settings menu. ...
Warning Lights, Gauges, and Indicators
Warning lights and gauges can signal that something is wrong before it
becomes serious enough to cause an expensive repair or replacement. Paying
attention to the warning lights and gauges could pre ...






