Recalling Button Memory Positions
To recall the manually saved Button Memory positions, press and hold “1” or “2.” The driver seat, outside mirrors, and adjustable pedals, if available, move to the positions stored to those buttons when pressed. Releasing “1” or “2” before the stored positions are reached stops the recall.
If something has blocked the driver seat and/or the adjustable pedals, if available, while recalling a memory position, the recall may stop. Remove the obstruction; then press and hold the appropriate manual control for the memory item that is not recalling for two seconds.
Try recalling the memory position again by pressing the appropriate memory button. If the memory position is still not recalling, see your dealer for service.
See also:
When the System Does Not
Seem to Work Properly
The following messages may be
displayed on the DIC:
PARKING ASSIST OFF: This
message occurs if the driver
disables the system or if vehicle is
driven above 8 km/h (5 mph) in
R (Reverse).
S ...
Supercharged powertrain
The Cadillac CTS-V Coupe employs the LSA 6.2L supercharged V-8 engine also
found on the CTS-V Sport Sedan. Rated at 556 horsepower (415 kW) and 551 lb.-ft.
of torque (747 Nm), it is the most power ...
Gasoline Specifications
(U.S. and Canada Only)
At a minimum, gasoline should
meet ASTM specification
D 4814 in the United States or
CAN/CGSB–3.5 or 3.511 in Canada.
Some gasolines contain an
octane-enhancing additive
called methylcyclop ...