Safety System Check
Now and then, check that the safety belt reminder light, safety belts, buckles, latch plates, retractors, and anchorages are all working properly. Look for any other loose or damaged safety belt system parts that might keep a safety belt system from doing its job. See your dealer to have it repaired. Torn or frayed safety belts may not protect you in a crash. They can rip apart under impact forces. If a belt is torn or frayed, get a new one right away.
Make sure the safety belt reminder light is working. See Safety Belt Reminders.
Keep safety belts clean and dry.
See Safety Belt Care.
See also:
Objects Detected by Both the Front and Rear Sensors
In general, if objects are detected at the same time near both the front and
rear bumpers while backing up, the beeps only sound to indicate that objects
are close to the rear bumper.
However, if ...
Parking Assist
If the vehicle has the Ultrasonic
Rear Parking Assist (URPA) system,
this display allows the system to
be turned on or off. Once in this
display, press the set/reset button
to select between ...
Exit Lighting
The interior lamps come on when the key is removed from the ignition. They turn
off automatically in 20 seconds. The lights do not come on if the dome override
button is pressed in. ...