Making a Call

Calls can be made using the following commands.

Dial or Call: The dial or call command can be used interchangeably to dial a phone number or a stored name tag.

Digit Dial: This command allows a phone number to be dialed by entering the digits one at a time.

Redial: This command is used to dial the last number used on the cell phone.

Using the Dial or Call Command

1. Press src=. The system responds Ready, followed by" width=43 height=18 id="_x0000_i1557" src="images/books/1183/4/index.65.gif" border=0>. The system responds Ready, followed by a tone.
2. Say Dial or Call.
3. Say the entire number without pausing or say the name tag.

Once connected, the person called will be heard through the audio speakers.

Using the Digit Dial Command

The digit dial command allows a phone number to be dialed by entering the digits one at a time.

After each digit is entered, the system repeats back the digit it heard followed by a tone.

If an unwanted number is recognized by the system, say Clear at any time to clear the last number.

To hear all of the numbers recognized by the system, say Verify at any time.

1. Press src=. The system responds Ready, followed by" width=43 height=18 id="_x0000_i1558" src="images/books/1183/4/index.65.gif" border=0>. The system responds Ready, followed by a tone.
2. Say Digit Dial.
3. Say each digit, one at a time, that you want to dial. After each digit is entered, the system repeats back the digit it heard followed by a tone. After the last digit has been entered, say Dial. Once connected, the person called will be heard through the audio speakers.

Using the Redial Command

1. Press src=. The system responds Ready, followed by" width=43 height=18 id="_x0000_i1559" src="images/books/1183/4/index.65.gif" border=0>. The system responds Ready, followed by a tone.
2. After the tone, say Redial. The system dials the last number called from the connected cell phone.

Once connected, the person called will be heard through the audio speakers.

    See also:

    Replacing Airbag System Parts after a Crash
    WARNING A crash can damage the airbag systems in the vehicle. A damaged airbag system may not work properly and may not protect you and your passenger(s) in a crash, resulting in serious inj ...

    There is also important loading information on the vehicle Certification/Tire label. It tells you the Gross Vehicle Weight Rating (GVWR) and the Gross Axle Weight Rating (GAWR) for the front and r
    Steps for Determining Correct Load Limit 1. Locate the statement The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs on your vehicle's placard. 2. Determine the ...

    Cadillac CTS Sport Wagon Preliminary Specifications
    Vehicle type: four-door, five-passenger rear-wheel-drive/all-wheel-drive wagon Wheelbase: 113.4" / 2880mm Length: 191.3" / 4859 mm Width: 72.6" / 1842 mm Height: 59.1" / 1502 ...