Dual Tone Multi-Frequency (DTMF) Tones

The Bluetooth system can send numbers and the numbers stored as name tags during a call. You can use this feature when calling a menu—driven phone system.

Account numbers can also be stored for use.

Sending a Number or Name Tag During a Call

1. Press src=. The system responds “Ready,” followed by" width=43 height=18 id="_x0000_i1572" src="images/books/1183/4/index.65.gif" border=0>. The system responds “Ready,” followed by a tone.
2. Say “Dial.”
3. Say the number or name tag to send.

    See also:

    Front Fog Lamps
    The front fog lamp button is located on the exterior lamp control, on the outboard side of the steering wheel. The ignition must be on to turn on the fog lamps. (Front Fog Lamps): Press to ...

    Dinghy Towing
    Notice: If the vehicle is towed with all four wheels on the ground, the drivetrain components could be damaged. The repairs would not be covered by the vehicle warranty. Do not tow the veh ...

    Starting the Engine Using Remote Start
    1. Press and release on the RKE transmitter. 2. Within two seconds, press and hold until the turn signal lamps flash. This confirms the request to remote start the vehicle has been received. If the ...