Pairing
A Bluetooth enabled mobile phone must be paired to the UHP system first and then connected to the vehicle before it can be used. See the mobile phone manufacturer's user guide for Bluetooth functions before pairing the mobile phone.
Pairing Information:
- Up to five mobile phones can be paired to the UHP system - The pairing process is disabled when the vehicle is moving - The UHP system connects with the first available paired mobile phone in the order the phone was paired - Only one paired mobile phone can be connected to the UHP system at a time - Pairing should only need to be completed once, unless changes to the pairing information have been made or the mobile phone is deleted
See also:
Daytime Running Lamp (DRL) (Uplevel)
1. From the back side of the headlamp assembly, remove the bottom cap to
replace the DRL bulb.
2. Disconnect electrical connector.
3. Remove the DRL bulb socket from the headlamp assembly.
4. ...
Top Tether Anchor
A top tether (A, C) anchors the top of the child restraint to the vehicle. A
top tether anchor is built into the vehicle. The top tether attachment (B) on the
child restraint connects to the top ...
Universal Remote System Programming
This system provides a way to
replace up to three remote control
transmitters used to activate
devices such as garage door
openers, security systems, and
home automation devices.
Do not u ...