New Vehicle Break-In
Notice: The vehicle does not need an elaborate break-in. But it will
perform better in the long run if you follow these guidelines:
- Do not drive at any one constant speed, fast or slow, for the first 805 km
(500 mi).
Do not make full-throttle starts. Avoid downshifting to brake or slow the
vehicle.
- During the first 1 000 km (600 mi), avoid using more than moderate
acceleration in lower gears and avoid vehicle speeds above 110 km/h (68mph).
- Between the first 1 000 km (600mi) and 5 000 km (3,000 mi), heavy
acceleration in lower gears can be used. Vehicle speeds above 110 km/h (68 mph)
should be limited to five minutes per use.
- Avoid making hard stops for the first 322 km (200 mi) or so. During this time
the new brake linings are not yet broken in. Hard stops with new linings can
mean premature wear and earlier replacement. Follow this breaking-in guideline
every time you get new brake linings.
- Do not tow a trailer during break-in. See Driving Characteristics and Towing
Tips for the trailer towing capabilities of your vehicle and more information.
Following break—in, engine speed and load can be gradually increased.
See also:
Driving Impressions
With a low driving position like Chevrolet's Corvette, the XLR is one sweet
road machine. Acceleration for passing is close to stunning, and the XLR is also
quick from a standstill, helped by prom ...
Towing the Vehicle From the Rear
Notice: Towing the vehicle from the rear could damage it. Also, repairs
would not be covered by the vehicle warranty. Never have the vehicle towed from
the rear. ...
Safety Locks
The vehicle has rear door security locks to prevent passengers from opening the
rear doors from the inside.
Open the rear doors to access the security locks on the inside edge of each door.
To s ...