Shifting Into Park
WARNING
It can be dangerous to get out of the vehicle if the shift lever is not fully
in P (Park) with the parking brake firmly set. The vehicle can roll. If you
have left the engine running, the vehicle can move suddenly. You or others
could be injured. To be sure the vehicle will not move, even when you are on
fairly level ground, use the steps that follow.
1. Hold the brake pedal down and set the parking brake.
See Parking Brake for more information.
2. Move the shift lever into P (Park) by pushing the lever all the way toward the front of the vehicle.
3. Turn the ignition off.
See also:
Body Component Lubrication
Lubricate all key lock cylinders, hood hinges, liftgate hinges, and steel fuel
door hinge unless the components are plastic. Applying silicone grease on weatherstrips
with a clean cloth will make ...
SBZA Detection Zones
The SBZA sensor covers a zone of approximately one lane over from both sides
of the vehicle, 3.5m (11 ft). This zone starts at each side mirror and goes back
approximately 5.0m(16 ft). The heigh ...
Magnetic Ride Control
With this feature on the CTS-V,
the Magnetic Ride Control system
adjusts the ride of the vehicle to
Tour or Sport modes. Magnetic Ride
Control monitors the suspension
system to determine the ...






