How to Reset the Engine Oil Life System
Reset the system whenever the engine oil is changed so that the system can calculate the next engine oil change. To reset the system:
1. Using the DIC MENU button and thumbwheel on the turn signal lever, display REMAINING OIL LIFE on the DIC. See Driver Information Center (DIC) and Engine Oil Messages.
2. Press the SET/CLR button to reset the oil life at 100%.
Be careful not to reset the oil life display accidentally at any time other than after the oil is changed. It cannot be reset accurately until the next oil change.
The oil life system can also be reset as follows:
1. Turn the ignition on with the engine off.
2. Fully press and release the accelerator pedal three times within five
seconds.
If the CHANGE ENGINE OIL SOON message is not on, the system is reset.
The system is reset when the CHANGE ENGINE OIL SOON message is off.
If the CHANGE ENGINE OIL SOON message comes back on when the vehicle is started, the engine oil life system has not been reset. Repeat the procedure.
See also:
Remote Control
To use the remote control, aim it at the transmitter window at the rear of the
RSE overhead console and press the desired button. Direct sunlight or very bright
light could affect the ability of ...
Passenger Airbag Status Indicator
The vehicle has a passenger sensing system. See Passenger Sensing System for
important safety information.
The overhead console has a passenger airbag status indicator.
United States
...
Selecting the Right Engine Oil
Selecting the right engine oil depends on both the proper oil specification and
viscosity grade. See Recommended Fluids and Lubricants .
Specification
Use and ask for licensed engine oils wi ...