Passenger Side
The removal of the air filter/cleaner assembly and base is required for the replacement of one of these bulbs:
1. Open the hood. See Hood.
A. Air Duct Clamp
B. Connector Lock
C. Sensor Connectors
D. Retaining Clips
2. Disconnect the outlet duct by loosening the air duct clamp (A).
3. Remove the connector lock (B) located at the bottom of the sensor connector
(C).
4. Press on the top and bottom of the sensor connectors (C) and remove.
5. Lift the three retaining clips (D) on the air filter housing.
6. Turn and tilt cover slightly upwards and slide cover away from outside edge
of vehicle.
Lift the cover away from base.
7. Lift the air cleaner/filter base to disengage from three pins.
See also:
Removal and Installation of the Sealant Canister
To remove the sealant canister:
1. Unwrap the sealant hose.
2. Press the canister release button.
3. Pull up and remove the canister.
4. Replace with a new canister which is available from your ...
Navigation
OnStar navigation requires the
Directions and Connections
service plan.
Push to receive directions or
have them sent to the vehicle
navigation screen. Destinations
can also be forwarded to ...
Checking Coolant in the
Intercooler System (CTS-V)
The vehicle must be on a level
surface when checking the
coolant level.
The super charged engine
intercooler coolant fill neck is
located in the engine compartment
on the passenger side of ...