Front Turn Signal Lamp (Base and Uplevel)
To replace the Front Turn Signal Lamp:
1. Remove the turn signal lamp bulb socket from the headlamp assembly.
2. Remove the turn signal lamp bulb from the socket.
3. Replace the bulb in the bulb socket.
4. Install the bulb socket in the headlamp assembly.
5. For driver side, reinstall the underhood electrical center cover by latching
three clips.
6. For passenger side, reinstall the air filter/cleaner assembly base by
pushing to seat . Verify the base is seated securely, then install the engine
air filter/ cleaner assembly
See also:
Rear Seats
Split Folding Seatbacks
With this feature, either side of the rear seatback can be folded down for
more cargo space.
Folding the Seatbacks
Notice: Folding a rear seat with the safety belts s ...
Delayed Locking
When locking the doors with the power lock switch and a door or the liftgate
is open, the doors will lock five seconds after the last door is closed. You will
hear three chimes to signal that the ...
Low Fuel Warning Light
This light is located near the fuel gauge and comes on briefly when the
ignition is turned on as a check to show it is working.
It also comes on when the fuel tank is low on fuel. The light tu ...