Turn Signal Lamps
To replace one of these bulbs:
1. Open the liftgate. See Liftgate .
A. Push Pin
B. Taillamp Cover
2. Pull on push pin (A) to release the taillamp cover (B).
3. Remove the taillamp cover from the lamp assembly by pulling rearward from
the top to unfasten from snap tabs.
4. Remove the two screws from the taillamp assembly.
5. Pull the taillamp assembly straight back to remove.
A. Turn Signal Lamp
B. Back-Up Bulb/Socket
6. Turn the turn signal lamp (A) bulb socket counterclockwise to remove it
from the taillamp assembly.
7. Pull the bulb straight out from the socket.
8. Press a new bulb into the socket, insert it into the taillamp assembly and
turn the bulb
socket clockwise until it clicks.
9. Reinstall the taillamp assembly and tighten the screws.
10. Reinstall the taillamp cover by snapping it into place.
11. Push the push pin to secure the taillamp cover.
See also:
Memory Seats
On vehicles with the memory feature, the “1” and “2” buttons on the outboard
side of the driver seat are used to manually save and recall the positions of
the driver seat, outside mirrors, and a ...
Rear Seats
The vehicle's second-row seats have head restraints in the outboard seating positions
that cannot be adjusted.
The vehicle's third-row seats, if equipped, have adjustable headrests in the
...
Pairing
A Bluetooth—enabled cell phone must be paired to the Bluetooth system and
then connected to the vehicle before it can be used.
See your cell phone manufacturer's user guide for Bluetooth functions ...