License Plate Lamp
To replace one of these bulbs:
1. Open the liftgate. See Liftgate for more information.
" width=409 height=331 id="_x0000_i1717" src="images/books/1183/8/index.21.gif" border=0>
Passenger Side Shown, Driver Side Similar
2. Push the left end of the lamp assembly towards the right.
3. Turn the lamp assembly down to remove from liftgate.
A. Bulb Socket
B. Bulb
C. Lamp Assembly
4. Turn the bulb socket (A) counterclockwise to remove from lamp assembly
(C).
5. Pull the bulb (B) straight out of the bulb socket.
6. Push the replacement bulb straight into the bulb socket and turn the bulb
socket clockwise to install into lamp assembly.
7. Turn the lamp assembly into the liftgate engaging the clip side first.
8. Push on the lamp side opposite the clip until the lamp assembly snaps into
place.
See also:
Mirror Adjustment
Exterior
Manual Folding Mirrors Shown
To adjust the mirror:
1. Move the selector switch to L (Left) or R (Right) to choose the driver or
passenger mirror.
2. Press the arrows on the con ...
Extending Engine Run Time
For a 10-minute extension, repeat Steps 1 and 2 while the engine is still
running. The remote start can only be extended once.
When the remote start is extended, the second 10-minute period will s ...
Uniform Tire Quality Grading
Quality grades can be found where applicable on the tire sidewall between tread
shoulder and maximum section width. For example: ...