Fuses and Circuit Breakers
The wiring circuits in the vehicle are protected from short circuits by a combination of fuses and circuit breakers. This greatly reduces the chance of damage caused by electrical problems.
To check a fuse, look at the silver-colored band inside the fuse.
If the band is broken or melted, replace the fuse. Be sure to replace a bad fuse with a new one of the identical size and rating.
Fuses of the same amperage can be temporarily borrowed from another fuse location, if a fuse goes out. Replace the fuse as soon as you can.
To identify and check fuses, circuit breakers, and relays, see Engine Compartment Fuse Block and Rear Compartment Fuse Block.
See also:
TTY Users
OnStar has the ability to
communicate to the deaf,
hard–of–hearing, or speech–impaired
customers while in the vehicle.
The available dealer–installed TTY
system can provide in-vehicle
acces ...
Removal and Installation of the Sealant Canister
To remove the sealant canister:
1. Unlock the air only hose (F) from the tire sealant canister (B) by pulling
up on the lever.
2. Pull the air only hose (F) from the tire sealant canister (B).
...
Scheduling Service Appointments (U.S. and Canada)
When the vehicle requires warranty service, contact your dealer and request
an appointment. By scheduling a service appointment and advising the service
consultant of your transportation needs, your ...