Storing Memory Positions
To save into memory:
1. Adjust the driver seat, including the seatback recliner and lumbar, both outside mirrors, power steering column, and the throttle and brake pedals.
See Power Mirrors , Steering Wheel Adjustment , and Adjustable Throttle and Brake Pedal .
Not all mirrors and adjustable throttles and brake pedals will have the ability to save and recall their positions.
2. Press and hold “1” until two beeps sound.
3. Repeat for a second driver position using “2.”
To recall, press and release “1” or “2.” The vehicle must be in P (Park). A single beep will sound. The seat, outside mirrors, steering column, and adjustable throttle and brake pedals will move to the positions previously stored for the identified driver.
See Memory Seats and Vehicle Personalization .
See also:
Audio System
When using the in-vehicle Bluetooth
system, sound comes through the
vehicle's front audio system
speakers and over-rides the audio
system. Use the audio system
volume knob, during a call, to ...
Checking Engine Oil
It is a good idea to check the engine oil level at each fuel fill. In order to
get an accurate reading, the vehicle must be on level ground. The engine oil dipstick
handle is a yellow loop. See En ...
Wiper Blade Replacement
Windshield wiper blades should be inspected for wear or cracking.
See Maintenance Schedule for more information.
It is a good idea to clean or replace the wiper blade assembly on a regular
basi ...