Easy Exit Positions
This feature can move the driver seat rearward and the power steering column up and forward to allow extra room to exit the vehicle.
(Easy Exit Positions): Press to recall the easy exit positions. The vehicle must be in P (Park).
If the easy exit feature is programmed on in the vehicle personalization menu, automatic driver seat and power steering column movement occur when the ignition key is removed.
A single beep sounds. The driver seat moves back approximately 8 cm (3 in) and the power steering column moves up and forward. To move the seat back farther, press again until the seat is all the way back.
If something has blocked the driver seat while recalling the exit position, the recall may stop. Remove the obstruction; then press and hold the power seat control rearward for two seconds. Try recalling the exit position again. If the exit position is still not recalling, see your dealer for service.
See Vehicle Personalization .
See also:
When to Check Lubricant
It is not necessary to regularly check rear axle fluid unless there is a leak
suspected or an unusual noise is heard. A fluid loss could indicate a problem. Have
it inspected and repaired.
All ax ...
Security Light
The security light should come on briefly as the engine is started. If the system
is working normally, the indicator light turns off. If it does not come on, have
the vehicle serviced by your de ...
Mirror Adjustment
Exterior
Controls for the outside power
mirrors are on the driver door.
To adjust each mirrors:
1. Press (A) or (B) to select the
driver or passenger side mirror.
2. Press the arrows on the ...