How to Wear Safety Belts Properly

This section is only for people of adult size.

There are special things to know about safety belts and children. And there are different rules for smaller children and infants. If a child will be riding in the vehicle, see Older Children   or Infants and Young Children  . Follow those rules for everyone's protection.

It is very important for all occupants to buckle up. Statistics show that unbelted people are hurt more often in crashes than those who are wearing safety belts.

There are important things to know about wearing a safety belt properly.

  • Sit up straight and always keep your feet on the floor in front of you.
  • Always use the correct buckle for your seating position.
  • Wear the lap part of the belt low and snug on the hips, just touching the thighs. In a crash, this applies force to the strong pelvic bones and you would be less likely to slide under the lap belt. If you slid under it, the belt would apply force on your abdomen. This could cause serious or even fatal injuries.
  • Wear the shoulder belt over the shoulder and across the chest. These parts of the body are best able to take belt restraining forces. The shoulder belt locks if there is a sudden stop or crash.

WARNING WARNING

You can be seriously injured, or even killed, by not wearing your safety belt properly.

  • Never allow the lap or shoulder belt to become loose or twisted.
  • Never wear the shoulder belt under both arms or behind your back.
  • Never route the lap or shoulder belt over an armrest.
    See also:

    Remote Start Auto Heated Seats
    When on, this feature will turn the heated seats on when using remote start on cold days. Press the MENU/SELECT knob when Remote Start Auto Heated Seats is highlighted. Turn the knob to select On ...

    Cargo & Towing
    Just like the Yukon, the Escalade's cargo configuration is less than optimal, but for four passengers on a weekend trip it was great. Three overnight bags, two golf bags and a garment bag on top a ...

    How to Check Lubricant
    To get an accurate reading, the vehicle should be on a level surface. For Two-Wheel-Drive vehicles, the proper level is from 15mm to 40mm (0.6 in to 1.6 in) below the bottom of the filler plu ...