Operation and Displays
The DIC has different displays which can be accessed by pressing the DIC buttons located on the instrument panel, next to the steering wheel.
The DIC displays trip, fuel, and vehicle system information, and warning messages if a system problem is detected. A digital speedometer also appears at the bottom of the DIC display.
The digital speedometer can be enabled or disabled. See “DISPLAY DIGITAL SPEED” under Vehicle Personalization for more information.
DIC Buttons
The buttons are the trip/fuel, vehicle information, customization, and set/reset buttons. The button functions are detailed in the following pages.
(Trip/Fuel): Press to display the odometer, trip odometer, fuel range, average economy, fuel used, timer, transmission temperature, instantaneous economy, and average vehicle speed.
The compass and outside air temperature will also be shown in the display. The temperature will be shown in °C or °F depending on the units selected.
(Vehicle Information): Press to display the oil life, units, side blind zone system on/off, tire pressure readings for vehicles with the Tire Pressure Monitor System (TPMS), compass zone setting, and compass recalibration.
(Customization): Press to customize the feature settings on your vehicle. See Vehicle Personalization for more information.
(Set/Reset): Press to set or reset certain functions and to turn off or acknowledge messages on the DIC.
See also:
PRESS START CONTROL TO
LEARN KEYS
If the vehicle has the keyless
access system, this message
displays when matching new
transmitters to the vehicle.
See the keyless access information
for Remote Keyless Entry (RKE)
System O ...
2010 Cadillac CTS4 3.6L Sport Wagon Review
You would have to have lived your entire life in a cave in the farthest
deepest recesses of the Sahara Desert to have never heard of Cadillac. If you
are 50 years old or older, you clearly remembe ...
Timer
This display can be used as a timer. To start the timer, press SET/CLR while
Timer is displayed.
The display will show the amount of time that has passed since the timer was
last reset. To stop t ...