Universal Remote System Operation
Press and hold the appropriate button for at least half of a second. The indicator light will come on while the signal is being transmitted.
Reprogramming Universal Home Remote Buttons
Any of the three buttons can be reprogrammed by repeating the instructions.
Erasing Universal Home Remote Buttons
The programmed buttons should be erased when the vehicle is sold or the lease ends.
To erase either Rolling Code or Fixed Code settings on the Universal Home Remote device:
1. Press and hold the two outside buttons at the same time for approximately 20 seconds, until the indicator lights, located directly above the buttons, begin to blink rapidly.
2. Once the indicator lights begin to blink, release both buttons. The codes from all buttons will be erased.
For help or information on the Universal Home Remote System, call the customer assistance phone number under Customer Assistance Offices (U.S. and Canada) or Customer Assistance Offices (Mexico) .
See also:
Remote Keyless Entry (RKE) System Operation (Keyless Access)
The Keyless Access System
transmitter will work up to 60m
(195 ft) away.
The Keyless Access System locks
and unlocks the doors and trunk
without pressing the buttons on
the keyless access t ...
Multi-Band Antenna
The antenna located on the roof of
the vehicle is used for the OnStar,
XM Satellite Radio Service System,
and GPS (Global Positioning
System), if the vehicle has these
features. Keep the ant ...
Bluetooth (Overview)
For vehicles equipped with Bluetooth capability, the system can interact
with many cell phones, allowing:
- Placement and receipt of calls in a hands-free mode.
- Sharing of the cell phone’s addr ...