Hill Start Assist (HSA)

Non-hybrid vehicles with StabiliTrak have a Hill Start Assist (HSA) feature, which may be useful when the vehicle is stopped on a grade. This feature is designed to prevent the vehicle from rolling, either forward or rearward, during vehicle drive off. After the driver completely stops and holds the vehicle in a complete standstill on a grade, HSA will be automatically activated. During the transition period between when the driver releases the brake pedal and starts to accelerate to drive off on a grade, HSA holds the braking pressure for a maximum of two seconds to ensure that there is no rolling. The brakes will automatically release when the accelerator pedal is applied within the two-second window. It will not activate if the vehicle is in a drive gear and facing downhill or if the vehicle is facing uphill and in R (Reverse). There may be situations on minor hills (less than 5% grade) with a loaded vehicle or while pulling a trailer where HSA will not activate.

    See also:

    Cruise Control
    Cruise Control Shown with Heated Steering Wheel Button (If Equipped) The cruise control buttons are located on the left side of the steering wheel. : Press to turn the system on or off. The indi ...

    Front Display
    The front display is located in the instrument panel in the center of the speedometer and has four bars to provide distance and system information. The following describes how the UFRPA front ...

    Turning the System On and Off
    The system can be disabled through the Driver Information Center (DIC). See “Parking Assist” under Driver Information Center (DIC) for more information. URPA defaults to the on setting each ti ...