Parking on Hills
WARNING
Parking the vehicle on a hill with the trailer attached can be dangerous. If something goes wrong, the rig could start to move. People can be injured, and both the vehicle and the trailer can be damaged. When possible, always park the rig on a flat surface.
If parking the rig on a hill:
1. Press the brake pedal, but do not shift into P (Park) yet. Turn the wheels into the curb if facing downhill or into traffic if facing uphill.
2. Have someone place chocks under the trailer wheels.
3. When the wheel chocks are in place, release the regular brakes until the chocks absorb the load.
4. Reapply the brake pedal. Then apply the parking brake and shift into P (Park).
5. Release the brake pedal.
WARNING
It can be dangerous to get out of the vehicle if the shift lever is not fully in P (Park) with the parking brake firmly set. The vehicle can roll.
If the engine has been left running, the vehicle can move suddenly. You or others could be injured. To be sure the vehicle will not move, even when on fairly level ground, always put the shift lever fully in P (Park) with the parking brake firmly set.
See also:
Vehicle Security
This vehicle has theft-deterrent
features; however, they do not make
it impossible to steal. ...
EPB Apply
The EPB can be applied any time the vehicle is stopped. The EPB is applied
by momentarily lifting up on the EPB switch. Once fully applied, the parking
brake status light will be on. While the brake ...
Battery Power Protection
This feature shuts off the dome lamps if they are left on for more than 10 minutes
when the ignition is in LOCK/OFF. This helps to prevent the battery from running
down. ...