Rear Wiper Blade Replacement

1. Lift the wiper blade assembly up and out of the park rest position.

2. Pull the wiper blade assembly away from the backglass. The backglass wiper

2. Pull the wiper blade assembly away from the backglass. The backglass wiper blade will not lock in a vertical position, so care should be used when pulling it away from the vehicle.

3. Turn the wiper blade assembly, and pull it off of the wiper arm. Hold the wiper arm in position and push the blade away from the wiper arm.

4. Replace the wiper blade.

4. Replace the wiper blade.

5. Return the wiper blade assembly to the park rest position.

    See also:

    Power Outlets
    The accessory power outlets can be used to plug in electrical equipment, such as a cell phone or MP3 player. The vehicle has four accessory power outlets. The power outlets located below the clim ...

    Compass
    Your vehicle may have a compass in the Driver Information Center (DIC). Compass Zone The zone is set to zone eight upon leaving the factory. Your dealer will set the correct zone for your location ...

    Transferring a Call
    Audio can be transferred between the in-vehicle Bluetooth system and the cell phone. The cell phone must be paired and connected with the Bluetooth system before a call can be transferred. ...