License Plate Lamp

1. Remove the two screws holding each of the license plate lamps to the molding

1. Remove the two screws holding each of the license plate lamps to the molding that is part of the liftgate.

2. Twist and pull the license plate lamp assembly forward through the molding opening.

3. Remove the bulb socket from the lamp assembly by turning it counterclockwise.

4. Pull the bulb straight out of the socket and install the new bulb.

5. Reverse Steps 1 through 3 to reinstall the license plate lamp.

    See also:

    PRESS BRAKE TO START ENGINE (AUTOMATIC TRANSMISSION ONLY)
    If the vehicle has the keyless access system, this message displays if you try to start the engine without having the brake pressed. The brake needs to be pressed when starting the engine. Se ...

    Automatic Headlamp System
    When it is dark enough outside, the automatic headlamp system turns on the headlamps at the normal brightness, along with the taillamps, sidemarker, parking lamps, and the instrument panel lights. ...

    Safety Belts
    This section of the manual describes how to use safety belts properly. It also describes some things not to do with safety belts. WARNING Do not let anyone ride where a safety belt cannot be wor ...