Windshield Wipers
If the wiper motor overheats due to heavy snow or ice, the windshield wipers will stop until the motor cools and will then restart.
Although the circuit is protected from electrical overload, overload due to heavy snow or ice may cause wiper linkage damage. Always clear ice and heavy snow from the windshield before using the windshield wipers.
If the overload is caused by an electrical problem and not snow or ice, be sure to get it fixed.
See also:
Engine Oil Change
When the CHANGE ENGINE OIL
SOON message displays, have the
engine oil and filter changed within
the next 1 000 km/600 mi. If driven
under the best conditions, the
engine oil life system migh ...
Automatic Transmission
The shift lever is located on the center console between the front seats.
There are several different positions for the shift lever.
P (Park): This position locks the front wheels. It is the ...
Brake System Messages
SERVICE BRAKE SYSTEM
This message displays along with the brake system warning light if there is a
problem with the brake system. See Brake System Warning Light . If this
message appears, s ...