Removal and Installation of the Sealant Canister
To remove the sealant canister:
1. Unlock the air only hose (F) from the tire sealant canister (B) by pulling up on the lever.
2. Pull the air only hose (F) from the tire sealant canister (B).
3. Unwrap the sealant/air hose (G) from the compressor (A).
4. Turn the tire sealant canister (B) so the inflator filling hose is aligned with the slot in the compressor.
5. Lift the tire sealant canister (B) from the compressor and replace with a new sealant canister. See your dealer for more information.
To install a new sealant canister:
1. Align the sealant/air hose (G) with the slot in the air compressor.
2. Push the tire sealant canister (B) down and turn it clockwise.
3. Wrap the sealant/air hose (G) around the air compressor channel to stow it in
its original location.
4. Push the air only hose (F) onto the sealant canister inlet and push the lever
down.
See also:
Keyless Locking
The doors lock after several
seconds if all doors are closed
and at least one keyless access
transmitter has been removed
from the interior of the vehicle.
To customize if the doors
automat ...
Customer Assistance Offices (U.S. and Canada)
Cadillac encourages customers to call the toll-free number for assistance. However,
if a customer wishes to write or e-mail Cadillac, the letter should be addressed
to:
United States
Cadillac Cu ...
High Intensity Discharge
(HID) Lighting
WARNING!
The low beam high intensity
discharge lighting system
operates at a very high voltage.
If you try to service any of the
system components, you could be
seriously injured. Have your ...