Storing Memory Positions
To save into memory:
1. Adjust the driver seat, outside mirrors, and the power steering column, if equipped, to the desired driving positions.
2. Press and hold “1” until two beeps sound.
3. Repeat for a second driver using “2.” To recall memory positions, press and release “1” or “2.” The vehicle must be in P (Park) for an automatic transmission, or the parking brake must be applied for a manual transmission. A single beep will sound when the button is pressed.
The seat, outside mirrors, and/or power steering column will move to the position previously stored for the identified driver.
If entry/exit recall is programmed on in the vehicle personalization menu, automatic entry recall occurs when the ignition is turned on.
See Memory Seats and Vehicle Personalization.
See also:
Trailer Towing
(Except CTS-V and
Coupe)
Before pulling a trailer, there are
three important considerations that
have to do with weight:
- The weight of the trailer.
- The weight of the trailer tongue.
- The total weight on the vehicl ...
Automatic Door Locks
For vehicles with an automatic
transmission, the doors will lock
automatically when all doors are
closed, the ignition is on, and the
shift lever is moved out of P (Park).
The doors will auto ...
Rear Window Wiper/Washer
For vehicles with a rear window
wiper/washer, the controls are on
the end of the windshield wiper
lever.
Press the upper or lower portion of
the button to control the rear wiper
and rear ...