Traction Control System (TCS)

The traction control system limits wheel spin. The system turns on automatically every time the vehicle is started.

- To turn off traction control, press and release the TCS/StabiliTrak button instrument panel (CTS) or located on the instrument panel (CTS) or the steering wheel (CTS-V).

The appropriate DIC message is displayed. See Ride Control System Messages.

- Press the TCS/StabiliTrak button control back on. again to turn traction control back on.

For more information, see Traction Control System (TCS).

    See also:

    Engine Compartment Fuse Block
    To remove the fuse block cover, press the clips on the cover and lift it straight up. Notice: Spilling liquid on any electrical component on the vehicle may damage it. Always keep the covers on a ...

    AVG (Average) Economy
    Displays the approximate average liters per 100 kilometers (L/100 km) or miles per gallon (mpg). The calculation is based on the number of L/100 km (mpg) recorded since the last time this di ...

    How the System Works
    URPA comes on automatically when the shift lever is moved into R (Reverse). A single tone sounds to indicate the system is working. URPA operates only at speeds less than 8 km/h (5 mph). An ...