See also:

Removing the Crossrails
1. Move both levers of the crossrail into the upper forward position. 2. Slide the crossrail into the cut-out area. 3. Remove the crossrail from the vehicle. 4. Repeat for the other crossrail ...

Turn and Lane-Change Signals
An arrow on the instrument panel cluster will flash in the direction of the turn or lane change. Move the lever all the way up or down to signal a turn. Raise or lower the lever until the a ...

Using the Tire Sealant and Compressor Kit without Sealant to Inflate a Tire (Not Punctured)
To use the air compressor to inflate a tire with air only and not sealant: If a tire goes flat, avoid further tire and wheel damage by driving slowly to a level place. Turn on the hazard warning ...