Front Seats
The vehicle's front seats have adjustable head restraints in the outboard seating positions.
WARNING!
With head restraints that are
not installed and adjusted
properly, there is a greater
chance that occupants will suffer
a neck/spinal injury in a crash.
Do not drive until the head
restraints for all occupants are
installed and adjusted properly.
Adjust the head restraint so that the top of the restraint is at the same height as the top of the occupant's head. This position reduces the chance of a neck injury in a crash.
The height of the head restraint can be adjusted. Pull the head restraint up to raise it. Try to move the head restraint to make sure that it is locked in place.
To lower the head restraint, press the button, located on the top of the seatback, and push the head restraint down. Try to move the head restraint after the button is released to make sure that it is locked in place.
The front seat outboard head restraints are not designed to be removed.
See also:
Armrest Storage
For vehicles with a rear seat armrest, pull the rear seat armrest forward to
access cupholders with removable liners. For vehicles with a rear storage area,
pull the lever to access. ...
Engine Heater
The engine coolant heater, if available, can help in cold weather conditions
at or below −18°C (0°F) for easier starting and better fuel economy
during engine warm-up.
Plug in the coolant h ...
Storing the Tire Sealant
and Compressor Kit
(Coupe)
The tire sealant and compressor kit
is located in the trunk in one of the
following locations.
1. Open the trunk. See Trunk
(Sedan, Coupe).
2. Remove the retainer that holds
the tire sea ...