Wagon
To lower one or both of the rear seatbacks:

1. Pull on the lever, on the top outboard side of the seatback, to unlock the seatback.
2. Fold the seatback down.
To return a seatback to the upright position:
WARNING!
If either seatback is not locked, it
could move forward in a sudden
stop or crash. That could cause
injury to the person sitting there.
Always push and pull on the
seatbacks to be sure they are
locked.
1. Lift the seatback up and push it back into place.
2. Make sure the seatback is locked into place by pushing and pulling on it.
3. Repeat Steps 1 and 2 for the other seatback.
When the seatback is not in use, it should be kept in the upright, locked position.
See also:
Storing the Flat Tire with a
Flat Load Floor (Wagon)
1. Return all tools as they were
stored in the rear storage
compartment and put the
compartment cover on.
2. Put the flat tire in the tire storage
bag, if there is one.
3. Place the tire, ly ...
Flash-to-Pass
This feature allows the high-beam
headlamps to be used to signal the
driver in front of you that you want
to pass.
Pull and hold the turn signal/lane
change lever toward you to use this
fea ...
Manual Liftgate
For vehicles without keyless access, unlock the vehicle before opening the
liftgate.
Press the touch pad located in the handle of the liftgate, above the license
plate, and lift up to open.
Do ...






