Compass Calibration
The compass can be manually calibrated. Only calibrate the compass in a magnetically clean and safe location, such as an open parking lot, where driving the vehicle in circles is not a danger.
Also calibrate the compass, away from tall buildings, utility wires, manhole covers, or other industrial structures, if possible.
If the DIC display does not show a heading, for example, N for North, or the heading does not change after making turns, there may be a strong magnetic field interfering with the compass. Interference may be caused by a magnetic antenna mount, magnetic note pad holder, or any other magnetic item. Turn off the vehicle, move the magnetic item, then turn on the vehicle and calibrate the compass.
See also:
Driver Side
The removal of the underhood electrical center is required for the
replacement of one of these bulbs:
1. Open the hood. See Hood.
WARNING
Liquids from environment or spillage and/or tools pla ...
SERVICE TIRE MONITOR
SYSTEM
This message displays if a part on
the Tire Pressure Monitor System
(TPMS) is not working properly.
The tire pressure light also flashes
and then remains on during the
same ignition cycle. Se ...
Customer Assistance for Text Telephone (TTY) Users (U.S. and Canada)
To assist customers who are deaf, hard of hearing, or speech-impaired and who
use Text Telephones (TTYs), Cadillac has TTY equipment available at its Customer
Assistance Center. Any TTY user can c ...