Compass Calibration Procedure
1. Before calibrating the compass, check that the compass is set to the correct variance zone.
See “Compass Variance (Zone) Procedure” earlier in this section.
Do not operate any switches such as window, sunroof, climate controls, seats, etc.
during the calibration procedure.
2. Press until PRESS TO CALIBRATE COMPASS displays.
3. Press to start the compass calibration.
4. The DIC will display CALIBRATING DRIVE IN CIRCLES. Drive the vehicle in tight circles at less than 8 km/h (5mph) to complete the calibration. The DIC will display CALIBRATION COMPLETE for a few seconds then returns to the PRESS TO CALIBRATE COMPASS display.
See also:
Interior
Two occupants fit inside the XLR's luxurious interior, which features
eucalyptus wood and aluminum accents. The seatbacks and cushions are heated and
cooled. The DVD navigation/entertainment syste ...
Lamp Messages
AFL (ADAPTIVE FORWARD
LIGHTING) LAMPS NEED
SERVICE
This message displays when the
Adaptive Forward Lighting (AFL)
system is disabled and needs
service. See your dealer. See
Adaptive Forwa ...
Radio Frequency Identification (RFID)
RFID technology is used in some vehicles for functions such as tire pressure
monitoring and ignition system security, as well as in connection with conveniences
such as key fobs for remote door lo ...