BATTERY SAVER ACTIVE
This message displays when the system detects that the battery voltage is dropping below expected levels. The battery saver system starts reducing certain features of the vehicle that may be noticeable.
At the point that the features are disabled, this message is displayed.
It means that the vehicle is trying to save the charge in the battery.
Turn off all unnecessary accessories to allow the battery to recharge.
The normal battery voltage range is 11.5 to 15.5 volts. You can monitor battery voltage on the DIC by pressing the vehicle information button until Battery Voltage is displayed.
See also:
Instrument Panel Illumination Control
(Instrument Panel Brightness): This
feature controls the brightness of the instrument panel lights and is located next
to the exterior lamps control.
Push the knob to extend out and then it ca ...
Back-Up Lamps
To replace one of these bulbs:
1. Open the liftgate. See Liftgate .
A. Push Pin
B. Taillamp Cover
2. Pull on push pin (A) to release the taillamp cover (B).
3. Remove the taillamp cover ...
Programming the Power Windows
Programming the power windows may be necessary if the vehicle's battery has
been disconnected or discharged.
If the window will not express up after power has been restored and a
message is displ ...