SIDE BLIND ZONE ALERT SYSTEM TEMPORARILY UNAVAILABLE
This message indicates that the SBZA system is disabled because the sensor is blocked and cannot detect vehicles in the blind zone.
The sensor may be blocked by mud, dirt, snow, ice, or slush.
This message may also activate during heavy rain or due to road spray. The vehicle does not need service. For cleaning, see Exterior Care.
See also:
Certification Label
Label Example
A vehicle-specific Certification
label is attached to either the
driver door edge or the lower
center pillar on the driver side of
the vehicle. The label tells the
gross wei ...
How to Check Lubricant
To get an accurate reading, the vehicle should be on a level surface.
A. Drain Plug
B. Fill Plug
If the level is below the bottom of the fill plug hole, located on the transfer
case, some lubri ...
SBZA Detection Zones
The SBZA sensor covers a zone
of approximately one lane over
from both sides of the vehicle,
or 3.5m(11 ft). This zone starts at
each side mirror and goes back
approximately 5.0 m(16 ft).
T ...