Entering the Feature Settings Menu
1. Turn the ignition on.
To avoid excessive drain on the battery, it is recommended that the headlamps are turned off.
2. Press the customization button to enter the feature settings menu.
See also:
Viscosity Grade
SAE 5W–30 is the best viscosity
grade for the vehicle. Do not use
other viscosity grade oils such as
SAE 10W–30, 10W–40, or 20W–50.
If in an area of extreme cold,
where the temperature falls ...
EPB Release
To release the EPB, place the ignition in the ON/RUN position, apply and
hold the brake pedal, and push down momentarily on the EPB switch. If you
attempt to release the EPB without the brake pedal ...
Brake System Messages
SERVICE BRAKE SYSTEM
This message displays along with the brake system warning light if there is a
problem with the brake system. See Brake System Warning Light . If this
message appears, s ...