Exiting the Feature Settings Menu

The feature settings menu will be exited when any of the following occurs:

- The vehicle is no longer in ON/RUN.

- The trip/fuel or vehicle information DIC buttons are pressed.

- The end of the feature settings menu is reached and exited.

- A 40-second time period has elapsed with no selection made.

    See also:

    Traction Control System (TCS)/StabiliTrak® Light
    The TCS/StabiliTrak light comes on briefly when the engine is started. If the light does not come on or stays on, have the vehicle serviced by the dealer. If the system is working normally, the i ...

    Hood
    To open the hood: 1. Pull the hood release lever with this symbol on it. It is located inside the vehicle on the lower side of the instrument panel. 2. Go to the front of the vehicle and ...

    SBZA Detection Zones
    The SBZA sensor covers a zone of approximately one lane over from both sides of the vehicle, 3.5m (11 ft). This zone starts at each side mirror and goes back approximately 5.0m(16 ft). The heigh ...