Headlamp High/Low-Beam Changer

Cadillac CTS / Cadillac CTS Owners Manual / Lighting / Exterior Lighting / Headlamp High/Low-Beam Changer

Push the turn signal/lane change lever away from you to turn the high beams on. Pull the lever toward you and then release it to return to low beams.

If the vehicle is turned off while the high beams are on, they will come on the next time the vehicle is started.

This indicator light turns on in the

This indicator light turns on in the instrument panel cluster when the high–beam headlamps are on.

    See also:

    BATTERY VOLTS LOW
    This message displays when the electrical system is charging less than 10 volts or the battery has been drained. If this message appears immediately after starting the engine, it is possibl ...

    2013 Cadillac ATS Review
    Topping out third gear I’ve got just enough time to think about grabbing fourth when the first braking marker is past my front tire and I’m pushing hard on the four piston Brembos. The lightest ca ...

    Dolly Towing (All-Wheel-Drive Vehicles)
    Notice: Towing an all-wheel-drive vehicle with all four wheels on the ground, or even with only two of its wheels on the ground, will damage drivetrain components. Do not tow an all-wheel-d ...