Flash-to-Pass
This feature allows the high-beam headlamps to be used to signal the driver in front of you that you want to pass.
Pull and hold the turn signal/lane change lever toward you to use this feature. When this is done the following will occur:
- If the headlamps are off or in low-beam mode, the high-beam headlamps will turn on. They will stay on as long as the lever is held there. Release the lever to turn them off.
- If the headlamps are already in high-beam mode, they will remain on high beam.
See also:
Adaptive cruise control
The XLR will be among the first vehicles with adaptive cruise control (ACC).
While not a substitute for full driver attention, this system greatly expands
the convenience of cruise control. ACC us ...
Airbag System Messages
SERVICE AIR BAG
This message displays when there
is a problem with the airbag system.
Have the vehicle serviced by your
dealer immediately. See Airbag
Readiness Light for
more information. ...
Safety Locks
Rear door safety locks prevent passengers from opening the rear doors from
the inside.
Press to activate the safety locks, the LED in the switch illuminates.
Press to deactivate the safety ...