Call Waiting
Call waiting must be supported on the cell phone and enabled by the wireless service carrier.
- Press
to answer an
incoming call when another call
is active. The original call is
placed on hold.
- Press
again to return to
the original call.
- To ignore the incoming call, no action is required.
- Press
to disconnect the
current call and switch to the call
on hold.
See also:
Dual Tone Multi-Frequency (DTMF) Tones
The in—vehicle Bluetooth system can send numbers during a call. This is used
when calling a menu—driven phone system.
1. Turn or press the MENU/ SELECT knob and select Enter Number.
2. Enter the ...
Leaving After Parking on a Hill
1. Apply and hold the brake pedal while you:
- Start the engine.
- Shift into a gear.
- Release the parking brake.
2. Let up on the brake pedal.
3. Drive slowly until the trailer is clear of ...
Conditions in Which Remote Start Will Not Work
The remote vehicle start feature
will not operate if any of the
following occur:
- The ignition is in any position
other than LOCK/OFF.
- A keyless access transmitter is
inside the vehicle.
...






