Shifting Into Park
WARNING!
It can be dangerous to get out of
the vehicle if the shift lever is not
fully in P (Park) with the parking
brake firmly set. The vehicle can
roll. If you have left the engine
running, the vehicle can move
suddenly. You or others could be
injured. To be sure the vehicle will
not move, even when you are on
fairly level ground, use the steps
that follow. If you are pulling a
trailer, see Driving Characteristics
and Towing Tips.
Use this procedure to shift into P (Park):
1. Hold the brake pedal down and set the parking brake.
See Parking Brake (Electric) or Parking Brake (Manual) for more information.
2. Move the shift lever into P (Park) by holding in the button on the shift lever and pushing the lever all the way toward the front of the vehicle.
3. Turn the ignition to LOCK/OFF.
4. For vehicles with key access, remove the key and take it with you. If you can leave the vehicle with the ignition key in your hand, the vehicle is in P (Park).
For vehicles with the keyless access system, take the keyless access transmitter with you.
See also:
Engine Overheating
The vehicle has several indicators
to warn of engine overheating.
There are two engine hot messages
that may be displayed in the Driver
Information Center (DIC). See
Engine Cooling System Mes ...
Programming Transmitters to the Vehicle
Only RKE transmitters programmed
to the vehicle will work. If a
transmitter is lost or stolen, a
replacement can be purchased and
programmed through your dealer.
When the replacement transmit ...
Front Fog Lamps
The front fog lamp button is located on the exterior lamp control, on the
outboard side of the steering wheel.
The ignition must be on to turn on the fog lamps.
(Front Fog Lamps): Press to ...