EPB Release
To release the EPB, turn the ignition switch to the ON/RUN position, apply and hold the brake pedal, and push down momentarily on the EPB switch. If you attempt to release the EPB without the brake pedal applied, a chime will sound, and the DIC message STEP ON BRAKE TO RELEASE PARK BRAKE will be displayed. The EPB is released when the BRAKE light is off and the DIC message PARK BRAKE RELEASED is displayed.
If the yellow light is on, the EPB has detected an error in another system and is operating with reduced functionality. To release the EPB when this light is on, push down on the EPB switch and hold it in the down position. EPB release may take a longer period of time than normal when this light is on.
Continue to hold the switch until the BRAKE light is off. If the yellow light is on, see your dealer.
Notice: Driving with the parking brake on can overheat the brake system and cause premature wear or damage to brake system parts. Make sure that the parking brake is fully released and the red brake warning light is off before driving.
See also:
Locking Feedback
This allows selection of what type of feedback is given when locking the
vehicle with the RKE transmitter.
Press the MENU/SELECT knob when Locking Feedback is highlighted. Turn the
knob to select ...
Empty Directory or Folder
If a root directory or a folder exists somewhere in the file structure that contains
only folders/subfolders and no compressed files directly beneath them, the player
advances to the next folder i ...
StabiliTrak® OFF Light
This light comes on briefly while starting the engine.
If it does not, have the vehicle serviced by your dealer. If the system is working
normally, the indicator light then goes off.
Press and r ...